Windows trims don’t only make your windows look great by filling up the gaps between the walls and the windows. But, they also stop the dust, drafts, and insects from sneaking into your rooms. By painting the window trim in Singapore, you can enhance their beauty and protect them from humidity, moisture, sun, mold, and mildew.
For that reason, let us teach you how to paint a window trim in Singapore to get an aesthetic appeal while ensuring they’re weatherproof. Also, LS Painter Singapore offers the best residential painting, house painting, and commercial painting services in Singapore.
How to paint a Windows Trim in Singapore? Experts Tips:
This is an expert Window Trim Painting guide to paint your trims in Singapore for a professional aesthetic finish.
1. Choose the Right Paint & Finish
You first need to choose a paint that offers a crisp, smooth, and slightly reflective finish for a modern look. You can use Satin or Semi-gloss colors, as they look great on the window trim and have a glossy appearance. Matte paint, commonly used in Singapore, should be avoided for trims.
Because it can easily collect dust, grime, and dirt and can also be quite hard to clean. Furthermore, when choosing the paint, ensure it’s weather-resistant, as the weather is pretty hard in Singapore.
2. Prep the Surface Like a Pro
If the trim’s surface is filled with mildew, grime, dust, dirt, or mold, paint won’t stick properly on it. That could lead to peeling, cracking, and damage within a few months.
Therefore, thoroughly clean the window trims using a damp cloth and mild soap before painting, removing dust and grime. If the trim has old paints, sand it down with 120- to 180-grit sandpaper and keep doing it until it’s smooth.
Also, inspect the trims and see if they have any cracks, damages, or holes and fill them up, as they could also make the paint less adhesive.
3. Tape Off the Edges for Sharp, Clean Lines
Whether you paint your window trim yourself or get it done by any painter, it’s common to get the paint spilled on the glass and other parts of the windows. So, use high-quality painter’s tape to mask the walls and the window glass.
4. Apply a High-Adhesion Primer
Using the primer on the trim is the most important as it stops the paint from peeling off and cracking due to Singapore’s humidity. Get a high-adhesion acrylic primer and apply it precisely with a good-quality angled brush. Let the primer dry for 2 to 4 hours before painting.
5. Use the Right Brush and Roller for a Seamless Finish
What brush and roller you use can also decide how good results your paint will provide. You can use a 2-inch high-quality synthetic angled brush when detailing the edges. For the longer trims, you can use a small foam roller that offers you professional finishing.
A mistake that we’ve seen most people making with the brush is overloading it with paint, which causes dripping and also increases consumption. Consequently, always pick only a small, thin layer of paint on your brush to avoid dripping and overconsumption.
6. Paint in Thin, Even Coats (2–3 Layers Needed)
Painting a window while in a hurry can ruin the look. Apply the first coat and let it dry for at least 4–6 hours (humidity might slow drying, so check the paint label). Lightly sand between coats with a fine 220-grit sandpaper to remove imperfections. Apply a second coat and, if needed, a third.
7. Remove the Tape at the Right Time for Crisp Edges
When you’ve added all the layers of the paint, and it has also been around 30 to 60 minutes, remove the tapes. Don’t be too late to remove them; when the paint is dry, removing the tape can crack the edges and create spots. If any paint slips when you remove the tap, you can use a blade to scrape it off gently.
8. Seal and Protect for Long-Lasting Modern Trims
Humidity is the big enemy of your paint, as it can make it fade, peel, chip, or mold over time. For that reason, to extend the life of your modern trims, apply a clear polyurethane sealant (for high-traffic areas) or a moisture-resistant topcoat.
This will protect your window trim’s paint from dust, humidity, and cleaning chemicals and extend its lifespan for years.
That’s how to paint a window trim in Singapore while making the paint easily handle the country’s tropical weather. Let us answer some of your frequently asked questions about the topic.
Final Words:
How to paint window trim in Singapore? Choose the right and weather-resistant paint, prep the surface, tape off edges, apply primer, use a quality brush or roller, paint in thin coats, remove the tape carefully, and seal for durability. Follow these window Trim Painting expert tips to paint your trims precisely while also making the paint last longer.
Frequently Asked Questions
The best way is to prep properly (clean, sand, and prime), then use a high-quality angled brush or foam roller for smooth, even coats. Always apply thin layers, sanding lightly between coats for a flawless finish.
It depends on the size and condition, but in Singapore, expect to pay around SGD 5–15 per foot or SGD 100–200 per window. Prices vary based on labor, paint quality, and prep work needed.
Go for semi-gloss or satin—they look modern, are easy to clean, and hold up well against moisture. Avoid matte, as it collects dust and doesn’t handle wear and tear well.
